Page: 1 2 3 4 5 6 7 8 9
|
|
Re: OBDII connector
Plugged my SG2 in that I had in the MPS previously tonight, seems to be working, will road test it tomorrow on the way to work.
It is running Ver 3 firmware (was bought about Sep 06) from US.
I know that it won't play with my older 98 GU Patrol -- apparently also comes back to US market requiring open compatibility and if not sold to that, can be funnier to get a generic reader to work.
And the MAP feature I think is related to turbos where there is something to cause positive pressure (aka turbo boost) - there may well not be pressure sensors on a NA motor?
Used to function quite nicely as a boost guage on the 3MPS showing boost spikes up to about 18psi, and instantaneous fuel usage (not an average) of about 130L/100km on WOT and full boost.....
---
Ian X-1289(c)
2009 Platinum TL Xtrail - Scanguage2, Mio Moov360 GPS, Fridge, 100AH AGM 2nd battery, cargo barrier.
1998 GU Patrol 4.5 Petrol, lifted locked, barred...... so much there.
|
|
28/Jul/2009, 10:56 pm
|
|
|
|
Re: OBDII connector
Try these guys.
http://www.scangauge.com/buy/australia.shtml
---
Chris
2004 ST X Trail
|
|
12/Aug/2009, 8:55 pm
|
|
|
|
Re: OBDII connector
Just to update... my SG2 works well in my 2009 Xtrail TL......
The boost readings (MAP) - Manifold absolute pressure - work too - and are surprising high.
Once I do the aftermaket wire and fully hide the wiring in the dash etc, and install the main panel permanently in the centre console upper opening I will post some pics.....
This is an older SG2, firmware 3.00 from memory bought about 3 years ago for my 3MPS.
Dave - if you want a test run, get in touch, seeing as I am in Ulvie...... 
---
Ian X-1289(c)
2009 Platinum TL Xtrail - Scanguage2, Mio Moov360 GPS, Fridge, 100AH AGM 2nd battery, cargo barrier.
1998 GU Patrol 4.5 Petrol, lifted locked, barred...... so much there.
|
|
23/Aug/2009, 9:48 pm
|
|
|
|
Re: OBDII connector
Got a chance to get a cheap ELMscan 5 USB unit like the one Jalal pointed out previously here.
When it arrives I'll test it out and post up my results.
--- 
Kev X450(c)
2003 Titanium Ti Luxury Series 1 |
|
30/Aug/2009, 10:41 pm
|
|
Page: 1 2 3 4 5 6 7 8 9
|
Very interested in the Scan Gauge 2, has anyone had success in running one on my vehicle which although purchased in early 2006 is a 2005 build.
David
