Page: 1 2 3 4
|
|
Re: T31 Fog lights
quote:
RE: Photos, when you upload the photos using the integrated photo uploader, click on "zoom" and copy the link at the bottom right corner of the page, which is the thumbnail code.
Thats what I did Jalal and they turned out as large photos. 
Tony
--- Tony X-891c
2008 T31 St
HERE is my X Trail
 |
|
9/Dec/2008, 9:02 pm
|
|
|
|
Re: T31 Fog lights
Jalal
The switch blanks measure, 35mm high (long) and 20mm wide.
There are about 10 odd of these and they all share the same measurement.
Tony
--- Tony X-891c
2008 T31 St
HERE is my X Trail
|
|
9/Dec/2008, 9:06 pm
|
|
|
|
Re: T31 Fog lights
Thanks Tony,
Can you please take photos showing the blank spots on the driver's side and also one of the blanks removed?
|
|
9/Dec/2008, 9:23 pm
|
|
|
|
Re: T31 Fog lights
Jalal
Here is a pic of the drivers side blank switches. I could not get one of them out because I could see myself damaging them, they have a very rigid top & bottom clip.
Tony
Last edited by jalalski, 10/Dec/2008, 10:05 pm
--- Tony X-891c
2008 T31 St
HERE is my X Trail
|
|
10/Dec/2008, 9:18 pm
|
|
|
|
Re: T31 Fog lights
Thanks Tony,
I swapped the working pic in your post.
By the way and for future reference should you need it. The easiest way to remove the blanks is by popping them out from behind by removing the fuse box cover and sticking your hand through the back so you can push them out.
|
|
10/Dec/2008, 10:08 pm
|
|
|
|
Re: T31 Fog lights
Jalal
I did try it from behind,and then as a last resort from the front, I pushed so hard my finger almost bled.
There must be some sort of trick to it.
Tony
--- Tony X-891c
2008 T31 St
HERE is my X Trail
|
|
11/Dec/2008, 5:57 am
|
|
|
|
Re: T31 Fog lights
LOL  Maybe they're not blanks at all and just for decoration. hahahaha 
|
|
11/Dec/2008, 6:33 am
|
|
|
|
Re: T31 Fog lights
Hi Andy,
I will be importing these fog lights for the T31 xtrail soon, I am just waiting for the right moment to order them as the Australian Dollar is pretty low at the moment compared to US Dollar.
Stay tuned and I will announce their availability in this thread.
|
|
20/Jan/2009, 6:24 am
|
|
|
|
Re: T31 Fog lights
quote:
I did try it from behind,and then as a last resort from the front, I pushed so hard my finger almost bled.
There must be some sort of trick to it.
Tony,
had a similar problem when mounting a switch for my Driving Lights - The trick is to pull the two clips towards the middle and then push the blank in towards the front of the car - not towards the rear. 
Had me cursing for ages until I worked it out.
BTW 35mm x 20mm Switches fit perfectly into the slot.
Cheers,
Andy
--- Andy (X982) (c)
2008 T31 TI 6 SPD Man in Precision Grey
Carpet Mats | Rear Carpet Mat | Cargo Barrier | Radiator Protection | Window Tint | Bonnet Protector | Driving Lights
|
|
20/Jan/2009, 3:33 pm
|
|
Page: 1 2 3 4
Link to us
- Blogs
- Hall of Honour
- Chat
|
